The Organica porcelain sink is pressed from one porcelain slab over a mould: bowl and top are a single piece, with no joints and no glue line. Organica has a soft stadium-shaped bowl, 60 × 30 cm and 15 cm deep. With no seam there is nowhere for water, soap and limescale to collect, and cleaning is one continuous wipe.
Every top is made to measure, from 70 to 150 cm wide: pick a width from the list (800, 1000, 1200 and 1500 mm) or enter an exact figure under "Other – specify mm". Depth is 45, 47 or 50 cm and the frame 6 or 15 cm high. Tap position is set on the order: the back rim, aligned centre, left or right, or no hole at all for a wall-mounted tap.
Pressing needs a slab that bends under heat, so Organica is made only from bendable porcelain slabs: 17 finishes in 10, 12 and 14.5 mm. Stonewood is currently the only manufacturer in Israel able to press porcelain this way.
Catalogue sizes: 80, 100 or 120 × 47 cm. Porcelain does not absorb water, so it resists stains, heat and scratching; warm water, mild soap and a soft cloth are enough day to day. Choose width, depth, frame height and finish on this page.
Frequently asked questions
Can I order a size that is not on the list?
Yes. The list shows widths of 800, 1000, 1200 and 1500 mm, but every Organica top is pressed to order at a width of 70 to 150 cm: choose "Other – specify mm" and enter the exact width. Depth (45, 47 or 50 cm) and frame height (6 or 15 cm) are chosen in the same place. The top is made to within ±2 mm of the size you order.
Does the sink come as one piece with the top, and how is it installed?
Yes. Organica is pressed from one porcelain slab, so bowl and top are a single piece with no joints and no glue line. It sits on a vanity unit or a wall-mounted frame, and the tap hole is cut in the back rim or left out for a wall-mounted tap. We can also install the sink, at an additional cost.
Which finishes can I choose, and how thick is the slab?
Organica is made only from bendable porcelain slabs, because pressing needs a slab that bends under heat: 17 finishes in 10, 12 and 14.5 mm. The bowl always carries the same finish as the top, because it is the same slab.
What is the lead time, what does delivery cost, and what warranty applies?
Every sink is cut and machined to order, in the size and finish you choose, so it is not a shelf product. The lead time is 14 business working days, which is the time until your sink is ready to ship from us. We deliver throughout Israel: ₪350 to the central region and ₪700 beyond it. The sink carries a one-year warranty against manufacturing defects; chips, cracks and damage after installation are not covered.