Integral Sinks

Integral bathroom sinks – made-to-measure porcelain slab, 60–250 cm

In an integral sink the bowl and the top are a single body: no basin sitting on the counter, none glued beneath it. Ours are bowl and top from the same porcelain slab, in the same colour, with a minimal joint – the vein of the slab runs from the top into the bowl. No silicone seam between bowl and top, so nothing needs replacing or whitening. Every integral sink is made to measure at our factory in Israel. What it is and how it differs from a vessel sink: the full integral-sink guide.

Made to measure: width, depth and frame

Choose the exact width of your niche, not the nearest size: a single sink 60–250 cm wide, or a double. Depth is 45, 47 or 50 cm. The frame – the front edge – is 6 cm for a slim look or 15 cm for a solid look that hides the cabinet; doubles have a 15 cm frame. The tap hole is set on the order: back, left or right rim, or no hole for a wall-mounted tap. Tolerance is ±2 mm: measure the niche at three points and take the smallest figure.

Five models, 37 finishes

The models differ in the shape of the basin. ALMA – a wide, shallow recess whose sides fold inward. BLANCO – a long, shallow channel almost the full width of the top. NOBLE – a rectangular basin with a raised rim and a flat ledge at one end. ROMA – a deep rectangular basin with a raised rim. SOL – with a 70 mm front rim or an open front. The basin carries the finish of the top – it is the same slab: 37 porcelain slab finishes in 9, 10, 12 and 14.5 mm – matt white, greys, veined marble, dark stone and wood grain – or a slab you supply, subject to checking the material.

Double bathroom sink

A double integral sink is two bowls in one top, from the same slab, at the width of your niche, with a 15 cm frame and 23 finishes. Tap positions are chosen on the order.

Pressed sinks too – from one slab

This category also holds our pressed porcelain sinks: the whole top, basin included, is pressed from one porcelain slab – one unit with no joint. Five models: ORGANICA and COMO at 70–150 cm, NANO at 65–150 cm, VETRO and NATO at 60–150 cm; a 15 cm-deep basin, a 6 or 15 cm frame, 17 bendable finishes. We are the only manufacturer in Israel that presses porcelain sinks from one slab.

Installation, care, price and lead time

The sink arrives ready to set on a bathroom vanity or a wall-mounted frame, with no silicone to seal. Care: warm water, mild soap and a soft cloth, no abrasive powders – how to care for an integral porcelain sink. The price depends on width, frame height and finish and is calculated on the site for every combination, VAT included. Up to 14 business days until the order is ready to ship; delivery within up to 19 business days of order confirmation, subject to arranging the delivery date. Delivery is ₪350 in the Tel Aviv and Central districts and ₪700 elsewhere, once per order, or pick up at the factory free of charge; installation at an additional charge. For the cabinet: made-to-measure bathroom vanities. Architects: PDF drawings on request – architects and designers.

Made at our own factory in Israel since 1932 · size tolerance up to ±2 mm · ready to ship within up to 14 business days · prices on the site include VAT · one-year warranty on manufacturing defects

Frequently asked questions

What is an integral sink?

A sink where the bowl and the top are a single body of the same material and colour, with no separate basin sitting on the counter or glued beneath it. Ours are both from the same porcelain slab, with a minimal joint.

Is there a seam in an integral sink?

There is a minimal joint between bowl and top, from the same slab and in the same colour. There is no silicone seam, so there is nothing to replace or whiten.

What sizes can I order an integral sink in?

A single sink 60–250 cm wide or a double; 45, 47 or 50 cm deep; a 6 or 15 cm frame (15 cm on doubles). You choose the exact width of your niche, and production tolerance is up to ±2 mm.

Can I order a double integral sink?

Yes. A double bathroom sink is made from the same slab, with two bowls, at the width of your niche, with a 15 cm frame and 23 finishes. Tap positions are chosen on the order.

Which finishes are there, and how thick is the slab?

37 porcelain slab finishes on a single sink (23 on a double), in 9, 10, 12 and 14.5 mm: matt white, greys, veined marble, dark stone and wood grain. The basin always carries the finish of the top, and you can also supply your own slab, subject to checking the material.

How much does an integral porcelain sink cost?

It depends on the width, frame height and finish, and is calculated on the site at once for every combination, VAT included, with no details to leave. Tap, trap, cabinet and installation are not included.

How is an integral sink installed?

It arrives ready to set on a bathroom vanity or a wall-mounted frame, with no bowl to bond and no silicone to seal between bowl and top. The tap hole is cut at the position you chose on the order. Our team installs at an additional charge, or your own installer does.

How long does it take, and what does delivery cost?

Up to 14 business days until the order is ready to ship, and delivery within up to 19 business days of order confirmation, subject to arranging the delivery date. Delivery is ₪350 in the Tel Aviv and Central districts and ₪700 elsewhere, once per order; pickup at the factory is free of charge.