SIENA — Laundry Machine Bay
A porcelain worktop over one washing machine or two side by side.
The SIENA turns the machines into a worktop. A 12 mm porcelain slab on 12 mm compact HPL reads 60 mm thick at the front and can fall to the floor as a waterfall at the open ends. Nothing rests on the machines: the top sits on a steel wall angle with a steel stiffener behind the apron. The machines stand on the floor underneath. Set it next to the PADOVA column, beside a sink base or between two walls.
Features
- 12 mm porcelain on 12 mm compact HPL, mitred 48 mm apron (60 mm visible front)
- Waterfall ends in porcelain over HPL, on hidden levelling glides
- 100 mm porcelain splashback
- Steel wall angle and front stiffener; side cleats where there is no end
- Fits machines up to 865 mm high
- Porcelain from the Stonewood slab range; one piece without a joint up to 268 cm
Sizes
| Model | W × D × H (cm) | Machines | Waterfall ends |
|---|---|---|---|
| SW-LB-065-E2 | 69.8 × 65 × 90 | 1 | Both sides |
| SW-LB-065-E1 | 67.4 × 65 × 90 | 1 | Right side only |
| SW-LB-065-E0 | 65 × 65 × 90 | 1 | None (side cleats) |
| SW-LB-130-E2 | 134.8 × 65 × 90 | 2 | Both sides |
| SW-LB-130-E1 | 132.4 × 65 × 90 | 2 | Right side only |
| SW-LB-130-E0 | 130 × 65 × 90 | 2 | None (side cleats) |
Washer and dryer not included. Clear height under the top is 87.6 cm. Custom sizes are available at extra cost.