The ALMA porcelain sink is an integral basin: bowl and top are made from the same porcelain slab, in the same colour, with a minimal joint. ALMA's basin is a wide, shallow recess whose sides fold inward, so the top reads as one continuous plane.
Every top is made to measure. Standard widths are 600, 800, 1000, 1200, 1500, 1800, 2000, 2200 and 2500 mm; for any other opening choose "Other – specify mm" and give the exact figure. The frame is 6 cm or 15 cm high, the depth 450, 470 or 500 mm. Tap position is set on the order: no hole at all for a wall mixer, or one in the back, left or right rim, aligned centre, left or right.
The basin carries the finish of the top, because it is the same slab: 37 porcelain finishes in 9, 10, 12 and 14.5 mm — matt whites and greys, veined marble, dark stone, wood grain — or a slab you supply yourself.
It arrives ready to set on a vanity unit or a wall-mounted frame. Porcelain does not absorb water, so it resists stains, heat and scratching; warm water and a soft cloth are enough day to day, and abrasive powders are best avoided.
Clean lines, precise proportions, a design language that does not date. Choose width, outer height and finish on this page.
Frequently asked questions
Can I order a size that is not on the list?
Yes. The list shows nine standard widths — 600, 800, 1000, 1200, 1500, 1800, 2000, 2200 and 2500 mm — but every ALMA top is cut to order. Choose "Other – specify mm" in the width field and enter the exact width of your opening. Depth (450, 470 or 500 mm) and outer height (6 or 15 cm) are chosen in the same place. The top is made to within ±2 mm of the size you order.
Are the sink and the top made from the same slab, and how is it installed?
Yes. ALMA is an integral sink — the basin and the top are made from the same porcelain slab, in the same colour, with a minimal joint. It sits on a vanity unit or a wall-mounted frame, and the tap hole is cut to the position you choose on the order: none at all for a wall-mounted mixer, or in the back, left or right rim. We can also install the sink, at an additional cost.
Which finishes can I choose, and how thick is the slab?
ALMA is available in 37 porcelain finishes, in 9, 10, 12 and 14.5 mm slab thicknesses — matt white, greys, veined marble looks, dark stone and a wood grain. The basin always carries the same finish as the top, because it is the same slab, and you can also supply your own slab.
What is the lead time, what does delivery cost, and what warranty applies?
Every sink is cut and machined to order, in the size and finish you choose, so it is not a shelf product. The lead time is 14 business working days, which is the time until your sink is ready to ship from us. We deliver throughout Israel: ₪350 to the central region and ₪700 beyond it. The sink carries a one-year warranty against manufacturing defects; chips, cracks and damage after installation are not covered.