The ALMA double porcelain sink is an integral sink with two basins: both bowls and the top are made from the same porcelain slab, in the same colour, with a minimal joint. The two recesses are wide and shallow and run side by side in the same slab.
Standard widths are 1800 and 2000 mm; for any other opening choose "Other – specify mm" and give the exact figure. The depth is 450, 470 or 500 mm, and double tops are made at one outer height, 15 cm. Tap position is set on the order: no hole for wall mixers, or one in the back, left or right rim, aligned centre, left or right.
Double tops come in 23 porcelain finishes, in 9, 12 and 14.5 mm, or in a slab you supply yourself. The basins carry the finish of the top, because it is the same slab.
It arrives ready to set on a vanity unit or a wall-mounted frame. Porcelain does not absorb water, so it resists stains, heat and scratching; warm water and a soft cloth are enough day to day, and abrasive powders are best avoided.
Clean lines, precise proportions, a design language that does not date. Choose width, depth and finish on this page.
Frequently asked questions
Can I order a size that is not on the list?
Yes. 1800 and 2000 mm are the two standard widths for the ALMA double top; for anything else choose "Other – specify mm" and enter the exact width of your opening. Depth is 450, 470 or 500 mm, and double tops are made at a single outer height — 15 cm. The top is made to within ±2 mm of the size you order.
Are the sink and the top made from the same slab, and how is it installed?
Yes. The ALMA double is an integral sink — both basins and the top are made from the same porcelain slab, in the same colour, with a minimal joint. It sits on a vanity unit or a wall-mounted frame, and the tap hole is cut to the position you choose on the order: none at all for a wall-mounted mixer, or in the back, left or right rim. We can also install the sink, at an additional cost.
Which finishes can I choose, and how thick is the slab?
The ALMA double top is available in 23 porcelain finishes, in 9, 12 and 14.5 mm slab thicknesses. The basins always carry the same finish as the top, because it is the same slab, and you can also supply your own slab. Fourteen finishes offered on the single model — the ten 10 mm slabs and four of the 9 mm ones — are not available on the double top.
What is the lead time, what does delivery cost, and what warranty applies?
Every sink is cut and machined to order, in the size and finish you choose, so it is not a shelf product. The lead time is 14 business working days, which is the time until your sink is ready to ship from us. We deliver throughout Israel: ₪350 to the central region and ₪700 beyond it. The sink carries a one-year warranty against manufacturing defects; chips, cracks and damage after installation are not covered.